You have no items in your shopping cart.
Search
Filters

HS1177 FPV Camera

HS1177 FPV Camera - 2 Versions

Surveilzone HS1177 FPV Camera

 

PAL - 2.8mm Lens - IR Blocked

 *** Please do not connect this camera directly to your 4S lipo or PDB 10/2/2016 ***

Although it is rated for voltages above 4S levels, there are voltage spikes present in the power wiring of a powerful miniquad which will exceed the specifications of this camera and can cause damage! Please understand, we can not replace cameras under warranty if they are damaged by being connected in this way!

 

* 2 versions available, relating to the orientation of the output cable, one for top exit, one for bottom exit.

 

As of early September, we are the only retailer to offer this camera in a choice of versions.  The top exit is best for most miniquad purposes as it protects the connector when the camera is tilted back, and keeps the wires up inside the frame while still providing good access to the connector.

Choose the top output camera for the Alien frames.  The bottom output camera will fit the Aliens and retain almost all fuctionality.  For instance it will not allow zero degrees tilt on the 4" frame...  But that's not what the frames are designed for anyway :)  

 

So basically there is next to no impact on which version you use with the Aliens, but we prefer the Top Output version for general miniquad use.

 

We offer the choice of both for instance for a wing etc, where the bottom output version may offer a cleaner install.

Surveilzone HS1177 FPV Camera

 

PAL - 2.8mm Lens - IR Blocked

 *** Please do not connect this camera directly to your 4S lipo or PDB 10/2/2016 ***

Although it is rated for voltages above 4S levels, there are voltage spikes present in the power wiring of a powerful miniquad which will exceed the specifications of this camera and can cause damage! Please understand, we can not replace cameras under warranty if they are damaged by being connected in this way!

 

* 2 versions available, relating to the orientation of the output cable, one for top exit, one for bottom exit.

 

As of early September, we are the only retailer to offer this camera in a choice of versions.  The top exit is best for most miniquad purposes as it protects the connector when the camera is tilted back, and keeps the wires up inside the frame while still providing good access to the connector.

Choose the top output camera for the Alien frames.  The bottom output camera will fit the Aliens and retain almost all fuctionality.  For instance it will not allow zero degrees tilt on the 4" frame...  But that's not what the frames are designed for anyway :)  

 

So basically there is next to no impact on which version you use with the Aliens, but we prefer the Top Output version for general miniquad use.

 

We offer the choice of both for instance for a wing etc, where the bottom output version may offer a cleaner install.

Picture of HS1177 FPV Camera Upper Left Connector
HS1177 FPV Camera Upper Left Connector
HS1177 FPV Camera Upper Left Connector
$44.80
Picture of HS1177 FPV Camera Lower Right Connector
HS1177 FPV Camera Lower Right Connector
HS1177 FPV Camera Lower Right Connector
$44.80